4 x Honda CBR900RR SC33 BJ 1996-1999 CBR 900 CBR900 RR SC 33 Carb Repair Kit

 

Honda CBR900RR SC33 BJ 1996-1999 CBR 900 CBR900 RR SC 3

 
Parts as shown

 

4 x Kawasaki ZXR750 ZXR 750 1989-1995 Carburetor Repair Kit Carb Kit

Kawasaki ZXR750 ZXR 750 1989-1995

 
Parts as shown

 

4 x O-rings, Washers for Keihin Mikuni Carb Carburetor Mixture Screw

4 off Nitrile Rubber (NBR) O-ring 5mm x 3mm x 1mm

4 off Stainless Steel Washer 5mm x 3mm x 0.5mm
Ideally suited to most Keihin and Mikuni Mixture Screws and many other carbs.
These are not OEM parts but superbly engineered alternatives.
The O-ring is made from;
  • nitrile rubber (NBR)
  • operating temp -50C to +120C
  • tough and robust
This O-ring is as fitted to the following mixture screws;
 
Kawasaki Part Number #92055-1002
Suzuki      Part Number #13295-29900
Yamaha   Part Number #3H1-14147-00-00
 

 

Nitrile is an excellent material for resistance to harmful chemical and oil environments at normal and elevated temperatures.
Widely used on automotive components, hardware components, bathrooms, household electrical appliances, electronic instruments etc.
This is the most common material/elastomer used in the seal industry.
 

 

 

Fork Oil/Dust Seals 39x52x11 (2prs) Harley Sportster XLN883C/L/N/R 1987 - 2014

 
 
HNBR (hydrogenated nitrile rubber) has better oil and chemical resistance than standard NBRs (nitrile rubbers) and can also withstand much higher temperatures. Like NBR, this type of elastomer has excellent resistance to oils and fuels but it also has excellent resistance to many chemicals, heat (steam / hot water) and ozone. The mechanical properties like tensile and tear strength, elongation, and abrasion resistance are also excellent. Furthermore, HNBRs have good dynamic behavior at elevated temperatures. The typical working temperature range is -25°C to +160°C (-40°F to +320°F).
 
 
Note. We do not offer a grease sachet as this is a confusing area. Some manufacturers advise no grease. Others do but what type to use. Some use fork oil. The choice is yours.

O-ring (3mm shaft) Nitrile Rubber (NBR) for fuel, air mixture screw (8 pack)

 

O-ring (3mm shaft) Nitrile Rubber (NBR) for fuel, air mixture screw (8 pack)




O-ring (3mm shaft) Nitrile Rubber (NBR) for fuel, air mixture screw (8 pack)

A universal carburetor O-ring

5mm OD x 3mm ID x 1mm
Made from;
  • nitrile rubber (NBR)

     

  • operating temp -50C to +120C
  • tough and robust
  • suits Keihin, Mikuni and many other carburetors
This O-ring is a suitable non OEM replacement, as fitted to the following mixture screws;
Kawasaki Part Number #92055-1002
Suzuki Part Number #13295-29900
Yamaha Part Number #3H1-14147-00-00

 

Excellent material for resistance to harmful chemical and oil environments at normal and elevated temperatures.
Widely used on automotive components, hardware components, bathrooms, household electrical appliances, electronic instruments etc.
The most common material/elastomer used in the seal industry.

 

 

Shipping

Shipping cost:
replace this text with your shipping information

Delivery time:
replace this text with your shipping information

Payment

We accept the following payment methods:

  • first payment option
  • second payment option
  • third payment option

Please contact us if you have any questions.

Service

replace this text with your service information

Vacuum Diaphragm Carb Harley-XLH883 (CV Type) Sportster

 

This is not a manufacturer's OEM part, but a superbly engineered alternative.
 
Overall diameter about 70 mm
Centre Cap Hole about 24 mm diameter
Overall Height about 20 mm
Harley Davidson XLH 883 Sportster
This part may fit other bikes.
Please check the dimensions PRECISELY before ordering.